R&D Capacidade
Certificação de produção
| Imagem | Nome da Certificação | Certificado por | Escopo de Negócio | Data Disponível --- Data de Expiração | Verificado |
|---|---|---|---|---|---|
|
Test Report | SGS | Test Information: Sample description: See photo Test item 1: Direct screw withdrawal from the face of the panel Test method: ASTM D1037-12 Section 16 Test condition: Specimen: 150*145*24.4mm Testing speed: 1.5mm/min Diameter of screw: 3.5mm Diameter of lead hole: 3.2mm Threaded depth: 17mm Test result: 2316N Test item 2: Impact resistance Test method: ASTM D4495-12 Test condition: Specimen thickness: 24.4mm Mass of the falling weight: 10lb Test result: more than124.6J(See note) Note: Test result exceeded the upper limit of the tester. Statement: Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. | 2015-07-16 ~ 2016-07-31 | |
|
Test Report | SGS | Test Information: Sample description: See photo Test item: Flexural strength and Flexural modulus Test method: ASTM D6109-13 Method A Test condition: Specimen: 550*145*24.6mm Testing speed: 13mm/min Support span: 392mm Test result: Max load: 4484N Flexural strength: 20.0MPa Flexural modulus: 3344MPa Statement: Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. | 2015-07-16 ~ 2016-07-31 | |
|
Test Report | SGS | Test Report. . No. CANMLC1512373801 Date: 27 Aug 2015. Page 2 of 3. Test Results :. Test Part Description :. Specimen No.. . SGS Sample ID. . Description. . SN1. CAN15-123738.001 Brown board. Remarks :. (1) 1 mg/kg = 1 ppm = 0.0001% . (2) MDL = Method Detection Limit . (3) ND = Not Detected ( < MDL ) . (4) "-" = Not Regulated. Heavy Metal. . Test Method :. With reference to GB 18584-2001. Analysis was performed by ICP OES. . Test Item(s). Unit. MDL. 001. Soluble Cadmium(Cd). mg/kg. 5 ND Soluble Lead(Pb). mg/kg. 5 ND Soluble Mercury(Hg). mg/kg. 5 ND Soluble Chromium(Cr). mg/kg. 5 ND Formaldehyde. . Test Method :. With reference to GB 18584-2001. Analysis was performed by UV-Vis. . Test Item(s). Unit. MDL. mg/L. 001. 0.2 ND Formaldehyde emission. Remark: Result of Heavy Metal is only for reference . | 2015-07-17 ~ 2016-07-23 |
Pesquisa e Desenvolvimento
There is/are 5 - 10 People R&D Engineer(s) in the company.
E-mail para este fornecedor
