Foshan Senlue Composite Material Technology Co., Ltd.
Gold Supplier
Gold Supplier is a premium membership for suppliers on Alibaba.com. Members are provided with comprehensive ways to promote their products, maximizing product exposure and increasing return-on-investment.
1YRSFoshan Senlue Composite Material Technology Co., Ltd.

COMPANY OVERVIEW

Company Album3

Basic Information
Senlue was established in 2009, the south China area large wood plastic PE professional manufacturer! And through the SGS international certification. Inspection on the spot!The company is located in Nanhai district, foshan city, the Shishan Xiaotang Xinjing industrial zone, plant area of more than ten thousand square meters, professional production line more than 10, ten thousand tons of annual capacity. Our company has established long-term stable business relationship with overseas clients. Product quality is very stable, outdoor WPC the best choice! Don't bend, not deformation, not cracking, high strength! waterproof, wear-resisting, prevent slippery, overloading. Company also has a professional team selection for each user to provide pre-sale and after-sale installation guide, with the most cost-effective collocation to protect the value of customers and the service life of the product. As companies adhering to the \"environmental protection, science and technology, high quality, good faith\" business philosophy, adhere to the practical, continuous innovation, product excellence, deeply delighting the customers.
5.0/5
Very satisfied
3 Reviews
  • 1 Transactions
    3,000+
  • Response Time
    ≤6h
  • Response Rate
    96.43%
Business Type
Manufacturer
Country / Region
Guangdong, China
Main ProductsTotal Employees
51 - 100 People
Total Annual Revenue
US$5 Million - US$10 Million
Year Established
2010
Certifications
-
Product Certifications(3)
Patents
-
Trademarks
-
Main Markets

PRODUCT CAPACITY

Factory Information

Factory Size
10,000-30,000 square meters
Factory Country/Region
Guangdong Province,Foshan city,nanhai xinjing industry area
No. of Production Lines
Above 10
Contract Manufacturing
OEM Service OfferedDesign Service OfferedBuyer Label Offered
Annual Output Value
US$5 Million - US$10 Million

Annual Production Capacity

Product Name
units Produced
highestEver
unit Type
Verified
WPC decking/cladding
7000
12000
Ton/Tons
Verified

R&D CAPACITY

Production Certification

Picture
Certification Name
Issued By
Business Scope
Available Date
Verified
Test Report
SGS
Test Information: Sample description: See photo Test item 1: Direct screw withdrawal from the face of the panel Test method: ASTM D1037-12 Section 16 Test condition: Specimen: 150*145*24.4mm Testing speed: 1.5mm/min Diameter of screw: 3.5mm Diameter of lead hole: 3.2mm Threaded depth: 17mm Test result: 2316N Test item 2: Impact resistance Test method: ASTM D4495-12 Test condition: Specimen thickness: 24.4mm Mass of the falling weight: 10lb Test result: more than124.6J(See note) Note: Test result exceeded the upper limit of the tester. Statement: Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.
2015-07-16 ~ 2016-07-31
-
Test Report
SGS
Test Information: Sample description: See photo Test item: Flexural strength and Flexural modulus Test method: ASTM D6109-13 Method A Test condition: Specimen: 550*145*24.6mm Testing speed: 13mm/min Support span: 392mm Test result: Max load: 4484N Flexural strength: 20.0MPa Flexural modulus: 3344MPa Statement: Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.
2015-07-16 ~ 2016-07-31
-
Test Report
SGS
Test Report. . No. CANMLC1512373801 Date: 27 Aug 2015. Page 2 of 3. Test Results :. Test Part Description :. Specimen No.. . SGS Sample ID. . Description. . SN1. CAN15-123738.001 Brown board. Remarks :. (1) 1 mg/kg = 1 ppm = 0.0001% . (2) MDL = Method Detection Limit . (3) ND = Not Detected ( < MDL ) . (4) "-" = Not Regulated. Heavy Metal. . Test Method :. With reference to GB 18584-2001. Analysis was performed by ICP OES. . Test Item(s). Unit. MDL. 001. Soluble Cadmium(Cd). mg/kg. 5 ND Soluble Lead(Pb). mg/kg. 5 ND Soluble Mercury(Hg). mg/kg. 5 ND Soluble Chromium(Cr). mg/kg. 5 ND Formaldehyde. . Test Method :. With reference to GB 18584-2001. Analysis was performed by UV-Vis. . Test Item(s). Unit. MDL. mg/L. 001. 0.2 ND Formaldehyde emission. Remark: Result of Heavy Metal is only for reference .
2015-07-17 ~ 2016-07-23
-
Verified
-
-
-

Research & Development

5 - 10 People